Saturday, February 24, 2024
HomeNatureSunset Photography Manual Program Mode Canon

Sunset Photography Manual Program Mode Canon

- Advertisement -

Know the details of the manual program so that you can know about photography and this program.

Today we are going to talk about evening photography here.

If we talk about Sunset, then a lot of posts have been made on this website itself. Which you can read, many people must have read our post. Today we are going to talk about evening photography only, but we will talk a little bit about the manual program in the camera. With which you will also enjoy doing photography.

- Advertisement -

This first photo that you see is so beautiful that no one can say that this photo is not good. This photo has been taken out in the evening time and this photo is without editing due to which it looks so beautiful. If you do not want to remove such photos, then all the settings of the camera are given under this photo, which you can read and click such photos. And about the manual program mode, both the photos below have talked about this program mode, which you do not forget to read because only after reading this you can do such photography.

Talking about this photo, we have blurred the sun that we are seeing in it so that we have clicked the photo by focusing on the tree at that place from where this photo was taken. When you take such photos, then you should do photography according to the environment of it so that your photos also look good and you will also enjoy photography. In the two photos given below, we have shown the sun as a complete one so that in those photos you can know how this sun appears at sunset. To know about those two photos, read below those photos.

- Advertisement -

Camera maker : Canon
Camera model : Canon EOS 1300D
Lens : 55 – 250mm 
Shutter speed : 1/160 Sec.
Aperture : F/5.6 
ISO : 100
Focal length : 250 mm
Flash mode : No flash 
Exposure program : Manual 
White balance : Auto

Now let’s talk about the photography of these two photos. The two photos you are seeing here, we have taken them both from the same place, but in the first photo we have shown half of the sun and in the second photo this sun is visible in less than half. This is the difference between these two pictures.

 

Camera maker : Canon
Camera model : Canon EOS 1300D
Lens : 55 – 250 mm
Shutter speed : 1/80 Sec. – 1/160Sec. 
Aperture F/5.6 
ISO : 100 – 400
Focal length : 200mm – 250 mm
Flash mode : No flash 
Exposure program : Manual 
White balance : Auto 

For such photography, I am telling you a few things about the manual program so that you will be useful in sunset photography as well as you will be able to use this mode in other types of photography as well.

About the settings of the manual program mode : 

In manual program mode, the three things you need to keep in mind the most are the shutter speed, aperture and ISO. In these three things, I am telling you the necessary settings, using which you can do any kind of photography anywhere.

  • The shutter speed that he uses to set the atmosphere and increase the shutter speed, then your photos will become black and dark and the speed of your camera’s photos will keep increasing. And if you reduce it, then you will have to take the photo by holding your camera in a complete way. When the speed is low, the speed of the camera to click photos becomes slow.

  • If you reduce the aperture, then it will keep your photos clean and if you increase it, it will darken your clicked photos. Whatever the aperture is, it helps you to do in photography. You can keep it on one of the settings, after which you can change the rest of the settings from the shutter speed, you can change the photography. Because of which you will not have to change the aperture again and again.
  • In the last, ISO, everyone must have known about it, it is the white balance of the camera, which is used to complete it. In this, when you increase the ISO, then you will increase the white and if you reduce it, then you will reduce the white. Because of which you have to set the ISO also once, after that you have to lower it slightly when you are clicking photos.
The above three settings work on each other, due to which you will have problems in the beginning but you will learn very quickly. This was the basic of manual program, for more information, in my next post, I will tell you about manual mode in detail. If you face any problem then you can ask me by email.

- Advertisement -
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular